NGK Iridium Spark Plug - ILZKR7B-11S

Installation Instructions for your new NGK Spark Plug:

• Confirm with manufacturers specifications on the thread reach of the spark plug
• Clean surface around gasket seat / spark plug hole to remove any dirt
• Insert spark plug and tighten until finger tight and the gasket touches the cylinder head
• Use a Spark Plug Wrench or correct spark plug socket to then tighten a further half to two-thirds of a turn to fully seat your NGK spark plug (Conical seat plugs require a further 1/16th turn)

Vehicles this plug suits:

Accord CU2 K24A 2008-

Accord J35Z2 SOHC VTEC 08>

Legend J37A2 08>

Also replaced ILZKR7B11-GS